REMTEC Port Elizabeth Contact Information

Organisation : REMTEC
Service Name : Contact Information
Headquarters : Port Elizabeth
Industry : Engine
Service/ Product : Engine Machining Services
Website : remtec [dot] co [dot] za

REMTEC Contact Information

If you have a question please contact us via WhatsApp, email or call us.

Related / Similar Contact : Vox Telecom Johannesburg Consumer & Business Support

General Enquiries:
Call us: 041 403 1327
Fax: 041 453 2765
Email: sales@remtec.co.za

Service Centre:
Tel: 041 403 1320 or 041 403 1327

Address:
Cnr Lindsay & Colas Roads
Korsten
Port Elizabeth 6020

Postal Address:
P.O.Box 14119
Sidwell, 6061

REMTEC Contacts

Christel Deyzel:
Sales & Customer Service
sales@remtec.co.za

Craige Brown:
Sales & Technical
cbrown@remtec.co.za

Ian Rayner:
Business Development & Sales
irayner@remtec.co.za

Jenny Alvarez:
Accounts
jalvarez@remtec.co.za

Koos du Preez:
Technical & After-sales Support
kdupreez@remtec.co.za

REMTEC Warranty

A Remtec Remanufactured Engine carries a benchmark ‘best in industry’ 100’000 km/12 month warranty (whichever comes first) . This is the same as that of a brand new engine and is subject to the following conditions:

The following is an overview of the Remtec warranty. The exact legal terms details and conditions are available on request:
** This is a Nationwide warranty within South Africa only
** The engine needs to be installed by an accredited RMI workshop
** The warranty becomes effective once the installation has been done in accordance with the Pre Installation checklist and the Installation Procedures and a warranty certificate has been issued.
** The workshop is required to inspect, clean, service and test all the ancillary components prior to installation.

These include:
a. Engine management system (including sensors [e.g. Lambda], fault codes, etc.
b. Ignition system (distributor, etc. including timing advance, etc.)
c. Intake system (filtration, correct assembly/fitment etc. including dust and debris entry, etc.)
d. Fuelling system (injectors/carburettors, filtration, etc. including fuel contamination, etc.)
e. Cooling system (radiator, thermostat, hoses, etc. including fluid leaks, air locks, etc.)

** Should any of the ancillary components and parts be considered unsatisfactory by the workshop and or technician they must be replaced in order for the warranty to be valid.
** The engine is to be serviced at 1000km after the engine has been installed. Further services are required at regular** intervals as per the service booklet by accredited workshops. Failure to do so will invalidate the warranty.
** Ancillary components are not covered in this warranty.
** Any damage to the engine caused by any failure of the ancillary components is not covered in this warranty.
** Warranty claims need to be done through an approved RMI workshop.
** Any repair work must be pre approved with Remtec. All faulty parts remain the property of the Remtec.
** The warranty will be invalidated if the vehicle has been used outside of its normal or prescribed use and tampered with to improve engine performance.